Dell Inspiron 5594 Service Manual - Page 56
Power button with fingerprint reader, Prerequisites, Procedure
View all Dell Inspiron 5594 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Power button with fingerprint reader Removing the power button with fingerprint reader NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Applicable only for computers that are shipped with fingerprint reader. Prerequisites 1. Remove the base cover. 2. Remove the battery. 3. Remove the solid-state drive/Intel Optane. 4. Remove the fan. 5. Remove the heat sink. 6. Remove the wireless card. 7. Remove the system board. NOTE: When removing and replacing the power button with fingerprint reader, do not remove the heat sink from the system board. Procedure 1. Remove the two screws (M2x3) that secure the power button with fingerprint reader to the palm-rest and keyboard assembly. 2. Lift the power button off the palm-rest and keyboard assembly. 3. Peel the fingerprint-reader cable off the palm-rest and keyboard assembly. 4. Lift the power button with fingerprint reader, along with the fingerprint-reader board and its cable, off the palm-rest and keyboard assembly. 56 Removing and installing components