Dell Inspiron N5030 Service Guide - Page 15
Display Bezel - replacement battery
View all Dell Inspiron N5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1 display assembly 3 display cable 2 screws (2) 4 Mini-Card antenna cable Replacing the Display Assembly 1. Follow the instructions in Before You Begin. 2. Place the display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base. 3. Route the display cable into the routing guide and connect the display cable to the connector on the system board. 4. Route the Mini-Card antenna cable into the routing guide and connect the Mini-Card antenna cable to the connector on the Mini-Card. 5. Turn the computer over and replace the two screws at the base of the computer. 6. Replace the palm rest (see Replacing the Palm Rest). 7. Replace the keyboard (see Replacing the Keyboard). 8. Replace the battery (see Replacing the Battery). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Display Bezel Removing the Display Bezel CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel. 1. Follow the instructions in Before You Begin. 2. Remove the display assembly (see Removing the Display Assembly). 3. Using your fingertips, carefully pry up the inside edge of the display bezel. 4. Remove the display bezel.