Dell Latitude E4310 Service Manual - Page 22

Back to Contents Page I/O Board Dell Latitude E4310 Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. Removing the I/O Board NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below. 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Remove the SIM. 4. Remove the ExpressCard. 5. Remove the SD memory card. 6. Remove the hard drive assembly. 7. Remove the hinge covers. 8. Remove the mini card door. 9. Remove the wireless local area network (WLAN) card. 10. Remove the memory door. 11. Remove the memory. 12. Remove the coin-cell battery. 13. Remove the optical drive. 14. Remove the LED covers. 15. Remove the keyboard. 16. Remove the display assembly. 17. Remove the palm rest. 18. Remove the system board. 19. Remove the screws that secures the I/O board to the computer. 20. Lift up the left side of the I/O board. 21. Gently push the RJ-45 port from outside to release the I/O board and remove the I/O board from the computer. Replacing the I/O Board To replace the I/O board, perform the above steps in reverse order. Back to Contents Page