Dell Latitude E4310 Service Manual - Page 4
Wake on LAN/WLAN - battery performance
View all Dell Latitude E4310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Computrace® CPU XD Support Non-Admin Setup Changes Password Configuration Admin Setup Lockout Performance Option Multi Core Support Intel® SpeedStep™ Intel® TurboBoost™ Power Management Option AC Behavior Auto On Time USB Wake Support Wake on LAN/WLAN ExpressCharge Charger Behavior POST Behavior Option Adapter Warnings l Deactivate-Disables the TPM. The TPM restricts access to the stored owner information and does not execute any commands that use TPM resources. l Activate-Enables and activates the TPM. l Clear-Clears the owner information stored in the TPM. Default Setting: Disabled Allows you to enable or disable the optional Computrace software. The options are Deactivate, Disable, and Activate. NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes will be allowed. Default Setting: Deactivate Allows you to enable or disable the Execute Disable mode of the processor. Default setting: Enabled Allows you to determine whether changes to the system setup options are allowed when an Administrator password is set. If disabled, the system setup options are locked by the admin password. Default Setting: Disabled Allows you to determine the minimum and maximum length of Administrator and System passwords. Allows you to prevent users from entering system setup when an Administrator password is set. Description Enables or disables multi-core support for the processor. Options are: All, 1, and 2 Default Setting: All Enables or disables the Intel SpeedStep feature. Default Setting: Enabled Enables or disables the Intel TurboBoost performance. Default Setting: Enabled Description Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected. Default Setting: Wake on AC Disabled Allows you to set the time at which the computer must turn on automatically. You can set the number of days, if any, when you would like the system to turn on automatically. The settings are Disabled, Everyday, or Weekdays. Default setting: Disabled Allows you to enable or disable the ability of USB devices to wake the computer from Standby. This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed when the computer is in Standby mode, the system setup will remove power from all of the USB ports to conserve battery power. Default Setting: Disabled Allows the computer to turn on by a special LAN signal or from Hibernate mode when triggered by a special wireless LAN signal. Wake-up from the Standby mode is unaffected by this setting and must be enabled in the operating system. l Disabled - Do not allow the system to power on when it receives a wake-up signal from the LAN or wireless LAN. l LAN Only - Allow the system to be powered on by special LAN signals. l WLAN Only - Allow the system to be powered on by special WLAN signals. l LAN or WLAN - Allow the system to be powered on by special LAN or wireless LAN signals. Default Setting: Disabled Allows you to enable or disable the ExpressCharge feature. NOTE: ExpressCharge may not be available for all batteries. Default Setting: ExpressCharge Allows you to enable or disable the battery charger. If disabled, the battery will not charge or lose power when the computer is connected to an AC adapter. Default setting: Enabled Description Allows you to enable or disable the BIOS warning messages when you use certain power adapters. The BIOS displays these messages if you attempt to use a power adapter that has too little capacity for your configuration. The factory default setting is Enabled.