Dell Latitude E5530 User Manual - Page 36

Installing the Display Assembly, Removing the Right Support Frame - hard drive

Get Dell Latitude E5530 PDF manuals and user guides View all Dell Latitude E5530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

8. Remove the display assembly from the computer. Installing the Display Assembly 1. Install the screws that secure the display assembly in place. 2. Insert the low-voltage differential signaling (LVDS) cable and wireless antenna cables through the holes on the chassis. 3. Route the LVDS cable along its compartment and connect the connector to the system board. 4. Connect the antenna cables to their connectors. 5. Install : a) palmrest b) processor door c) optical drive d) keyboard e) keyboard trim f) bottom door g) battery h) SD memory card 6. Follow the procedures in After Working Inside Your Computer. Removing the Right Support Frame 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) SD memory card b) battery c) bottom door d) keyboard trim e) optical drive f) hard drive g) processor door h) palmrest i) display assembly 3. Remove the screws that secure the right support frame to the computer. 4. Lift the right support frame away from the computer. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
8.
Remove the display assembly from the computer.
Installing the Display Assembly
1.
Install the screws that secure the display assembly in place.
2.
Insert the low-voltage differential signaling (LVDS) cable and wireless antenna cables through the holes on the
chassis.
3.
Route the LVDS cable along its compartment and connect the connector to the system board.
4.
Connect the antenna cables to their connectors.
5.
Install :
a)
palmrest
b)
processor door
c)
optical drive
d)
keyboard
e)
keyboard trim
f)
bottom door
g)
battery
h)
SD memory card
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Right Support Frame
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
SD memory card
b)
battery
c)
bottom door
d)
keyboard trim
e)
optical drive
f)
hard drive
g)
processor door
h)
palmrest
i)
display assembly
3.
Remove the screws that secure the right support frame to the computer.
4.
Lift the right support frame away from the computer.
36