Dell Latitude E5530 User Manual - Page 42
Installing the System Board, After Working Inside Your Computer - hard drive replacement
View all Dell Latitude E5530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Figure 42. Installing the System Board 1. Align the system board into its original position on the computer. 2. Replace and tighten the screws to secure the system board to the computer. 3. Route and connect the following cables the system board: a) audio board flat flex cable b) Bluetooth cable c) speaker cable d) DC-in cable e) thermal fan cable 4. Install : a) left support frame b) display assembly c) ExpressCard reader cage d) palm rest e) thermal module f) processor door g) hard drive h) optical drive i) keyboard j) keyboard trim k) bottom door l) battery m) SD memory card 5. Follow the procedures in After Working Inside Your Computer. 42
Figure 42.
Installing the System Board
1.
Align the system board into its original position on the computer.
2.
Replace and tighten the screws to secure the system board to the computer.
3.
Route and connect the following cables the system board:
a)
audio board flat flex cable
b)
Bluetooth cable
c)
speaker cable
d)
DC-in cable
e)
thermal fan cable
4.
Install :
a)
left support frame
b)
display assembly
c)
ExpressCard reader cage
d)
palm rest
e)
thermal module
f)
processor door
g)
hard drive
h)
optical drive
i)
keyboard
j)
keyboard trim
k)
bottom door
l)
battery
m)
SD memory card
5.
Follow the procedures in
After Working Inside Your Computer
.
42