Dell Latitude E6330 Owner's Manual - Page 43
Installing the I/O Board, Removing the Display Bezel
View all Dell Latitude E6330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing the I/O Board 1. Place the I/O board in its compartment. 2. Tighten the screws to secure the I/O board. 3. Install: a) system board b) display assembly c) display hinge covers d) media board e) palmrest f) bluetooth module g) keyboard h) keyboard trim i) base cover j) optical drive k) hard drive l) battery m) ExpressCard n) SD card 4. Follow the procedures in After Working Inside Your Computer. Removing the Display Bezel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Pry up the bottom edge of the display bezel. 4. Pry up the left, right and top edges of the LCD bezel. 43
Installing the I/O Board
1.
Place the I/O board in its compartment.
2.
Tighten the screws to secure the I/O board.
3.
Install:
a)
system board
b)
display assembly
c)
display hinge covers
d)
media board
e)
palmrest
f)
bluetooth module
g)
keyboard
h)
keyboard trim
i)
base cover
j)
optical drive
k)
hard drive
l)
battery
m) ExpressCard
n)
SD card
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Bezel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the battery.
3.
Pry up the bottom edge of the display bezel.
4.
Pry up the left, right and top edges of the LCD bezel.
43