Dell Latitude E6330 Owner's Manual - Page 50
Installing the Display-Hinge Walls
View all Dell Latitude E6330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
7. Remove the screw that secures the right display-hinge wall to the display assembly. 8. Slide and remove the right display-hinge wall out of the display assembly. Installing the Display-Hinge Walls 1. Place both the display-hinge walls on the panel. 2. Insert the antenna cables into their opening on the right display-hinge wall and secure them using the adhesive tape to the display assembly. 3. Tighten the screws to secure the display-hinge walls to secure them to the display assembly. 4. Install: a) power LED board b) display panel c) display bezel d) display assembly e) display hinge covers f) media board g) palmrest h) bluetooth module 50
7.
Remove the screw that secures the right display-hinge wall to the display assembly.
8.
Slide and remove the right display-hinge wall out of the display assembly.
Installing the Display-Hinge Walls
1.
Place both the display-hinge walls on the panel.
2.
Insert the antenna cables into their opening on the right display-hinge wall and secure them using the adhesive
tape to the display assembly.
3.
Tighten the screws to secure the display-hinge walls to secure them to the display assembly.
4.
Install:
a)
power LED board
b)
display panel
c)
display bezel
d)
display assembly
e)
display hinge covers
f)
media board
g)
palmrest
h)
bluetooth module
50