Dell Latitude E6400 XFR Setup and Features Information Tech Sheet - Page 10

Setup - power adapter

Page 10 highlights

Dell™ Latitude™ E6400 XFR Setup and Features Information The Secure Digital card can be fully inserted, allowing the protective door to be closed. Insert the card into the secure digital slot until it is fully seated in its connector. To release the secure digital card, press in on the card edge and the reader will eject the card. Reverse the procedure to close the protective door. Setup WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage. CAUTION: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. When you wrap the AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the cable. NOTE: Some devices may not be included if you did not order them. NOTE: It is recommended that you turn on and shut down your computer at least once before you install any cards or connect the computer to a docking device or other external device, such as a printer. 1. Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet. 2. Connect the network cable. Page 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

Dell
Latitude™ E6400 XFR Setup and Features Information
Page 10
The Secure Digital card can be fully inserted, allowing the protective door to be closed.
Insert the
card into the secure digital slot until it is fully seated in its connector.
To release the secure digital
card, press in on the card edge and the reader will eject the card.
Reverse the procedure to close the protective door.
Setup
WARNING
:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: The AC adapter works with electrical outlets worldwide. However, power
connectors and power strips vary among countries. Using an incompatible cable or
improperly connecting the cable to the power strip or electrical outlet may cause fire
or equipment damage.
CAUTION: When you disconnect the AC adapter cable from the computer, grasp the
connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.
When you wrap the AC adapter cable, ensure that you follow the angle of the
connector on the AC adapter to avoid damaging the cable.
NOTE:
Some devices may not be included if you did not order them.
NOTE:
It is recommended that you turn on and shut down your computer at least once before
you install any cards or connect the computer to a docking device or other external device, such
as a printer.
1.
Connect the AC adapter to the AC adapter connector on the computer and to the electrical
outlet.
2.
Connect the network cable.