Dell MX9116n EMC SmartFabric OS10 User Guide Release 10.5.0 - Page 51

1. Update component " iDRAC with Lifecycle Controller " via OME 2. Repeat Step 1 instructions to update components " Dell EMC Modular. Server BIOS PowerEdge MX740c " and " Dell EMC Server BIOS a. If OME Modular is managing a "Chassis Group", then login to PowerEdge MX840c" as applicable. OME Modular of the Lead chassis. b. From the global menu, click Devices and select Compute from the dropdown. c. This lists all the available Compute devices in the chassis or chassis group. d. Select the checkbox to select all the Compute devices in the current page. If there are multiple pages, then navigate to each page and select the checkbox. e. Once all the Compute devices in all the pages are selected, click " Update Firmware " menu button. f. In the popup wizard, select the individual package and click Browse button to select the " iDRAC with Lifecycle Controller " DUP. g. Once the DUP is uploaded, click Next and select the Compliance checkbox. Click Finish to start the update on all the Compute devices. h. Allow the job to complete before proceeding to Step 2. 3. Repeat Step 1 instructions to update components " Qlogic 26XX 4. Update component "OpenManage Enterprise Modular" . series Fibre Channel adapters ", "Qlogic 27XX series Fibre Channel adapters", "Qlogic 41xxx series adapters", "Mellanox ConnectX-4 Lx Ethernet Adapter Firmware", "Intel NIC Family Version 19.5.x Firmware for X710, XXV710 and XL710 adapters", and "Emulex Picard-16/Picard-32 adapters" as applicable. It is recommended to visit Dell.com to download the latest device drivers associated with firmware update. a. If OME Modular is managing a "Chassis Group", then login to OME Modular of the Lead chassis. b. If the current version is either 1.10.00 or 1.10.10, skip to Step 4d. c. If the current version is 1.00.01 or 1.00.10, an update to the bridge version 1.10.00 or 1.10.10 is required before updating to 10.10.20. Follow the steps to update to 1.10.10. NOTE: Updating to 1.1.x may log alert HWC7522 and require MX7116n or PTM IOMs to be rebooted. . i. From the global menu, click Devices and select Chassis from the dropdown. ii. This list all the Chassis devices. iii. Select the checkbox to select all the Chassis in the current page. If there are multiple pages, then navigate to each page and select the checkbox. iv. Once all the Chassis devices in all the pages are selected, click " Update Firmware " menu button. v. In the popup wizard, select the individual package and click Browse button to select the "OpenManage Enterprise Modular" 1.10.10 DUP. vi. Once the DUP is uploaded, click Next and select the top Compliance checkbox. Click Finish to start the update on all Chassis. vii. Allow the job to complete. d. Current version is either 1.10.00 or 1.10.10 . i. From the global menu, click Devices and select Chassis from the dropdown. ii. This list all Chassis devices. iii. Select the checkbox to select all the Chassis on the current page. If there are multiple pages, then navigate to each page and select the checkbox. iv. Once all the Chassis devices in all the pages are selected, click " Update Firmware " menu button. Getting Started with Dell EMC SmartFabric OS10 51