Dell OptiPlex 3020 Dell OptiPlex 3020-Small Form Factor Owners Manual - Page 15
Installing the Optical Drive, Removing the Drive Cage
View all Dell OptiPlex 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
5. Flex the optical-drive bracket and then lift the optical drive from the bracket 6. Repeat steps 3 to 5 to remove the second optical drive (if available). Installing the Optical Drive 1. Insert the optical drive into the bracket. 2. Slide the optical drive to insert it into the drive cage. 3. Connect the data and power cables to the optical drive. 4. Install the cover. 5. Follow the procedures in After Working Inside Your Computer. Removing the Drive Cage 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) cover b) front bezel c) optical drive 3. Disconnect the data and the power cables from the back of the hard drive. 15
5.
Flex the optical-drive bracket and then lift the optical drive from the bracket
6.
Repeat steps 3 to 5 to remove the second optical drive (if available).
Installing the Optical Drive
1.
Insert the optical drive into the bracket.
2.
Slide the optical drive to insert it into the drive cage.
3.
Connect the data and power cables to the optical drive.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Drive Cage
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
cover
b)
front bezel
c)
optical drive
3.
Disconnect the data and the power cables from the back of the hard drive.
15