Dell OptiPlex 3020 Dell OptiPlex 3020-Small Form Factor Owners Manual - Page 34
Installing the System Board
View all Dell OptiPlex 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing the System Board 1. Align the system board to the port connectors on the rear of the chassis and place the system board in the chassis. 2. Tighten the screws securing the system board to the chassis. 3. Connect the cables to the system board. 4. Install the: a) power supply b) expansion card(s) c) heat sink assembly d) memory e) drive cage f) optical drive g) front bezel h) cover 5. Follow the procedures in After Working Inside Your Computer. 34
Installing the System Board
1.
Align the system board to the port connectors on the rear of the chassis and place the system
board in the chassis.
2.
Tighten the screws securing the system board to the chassis.
3.
Connect the cables to the system board.
4.
Install the:
a)
power supply
b)
expansion card(s)
c)
heat sink assembly
d)
memory
e)
drive cage
f)
optical drive
g)
front bezel
h)
cover
5.
Follow the procedures in
After Working Inside Your Computer
.
34