Dell OptiPlex 5050 Tower Tower Owners Manual - Page 23
Memory module, Removing memory module
View all Dell OptiPlex 5050 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2. Tighten the screw to secure the SD card reader to the front panel door. 3. Connect the SD card reader cable to the connector on the system board. 4. Close the front panel door. 5. Install the: a. bezel b. cover 6. Follow the procedure in After working inside your computer. Memory module Removing memory module Steps 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. cover b. bezel 3. Open the front panel door. 4. To remove the memory module: a. Push the memory module retention tabs on both sides of the memory module. b. Lift the memory module from the memory module connector on the system board. Installing memory module Steps 1. Align the notch on the memory module with the tab on the memory module connector. 2. Insert the memory module into the memory module socket. 3. Press the memory module until the memory module retention tabs click into place. 4. Close the front panel door. 5. Install the: a. cover b. bezel 6. Follow the procedure in After working inside your computer. Removing and installing components 23