Dell OptiPlex 5050 Tower Tower Owners Manual - Page 61
Table 12. Intel Software Guard Extensions continued, Table 13. Performance, Table 14. Power Management
View all Dell OptiPlex 5050 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Table 12. Intel Software Guard Extensions (continued) Option Description ● Disabled (default) ● Enabled Enclave Memory Size Allows you to set the Intel SGX Enclave Reserve Memory Size. ● 32 MB ● 64 MB (Disabled by default) ● 128 MB (Disabled by default) Table 13. Performance Option Multi Core Support Intel SpeedStep C States Control Limited CPUID Value Intel TurboBoost Description This field specifies whether the process will have one or all cores enabled. This option is enabled by default. options: ● All (selected by default) ●1 ●2 ●3 Allows you to enable or disable the Intel SpeedStep mode of the processor. This option is enabled by default. Allows you to enable or disable additional processor sleep states. This option is enabled by default. Allows you to limit the maximum value of the processor standard CPUID function. This option is disabled by default. Allows you to enable or disable the Intel TurboBoost mode of the processor. This option is enabled by default. Table 14. Power Management Option Description AC Recovery Determines how the system responds when AC power is re-applied after a power loss. You can set the AC Recovery to: ● Power Off ● Power On ● Last Power State This option is Power Off by default. Auto On Time Sets time to automatically turn on the computer. Time is kept in standard 12-hour format (hour:minutes:seconds). Change the startup time by typing the values in the time and AM/PM fields. NOTE: This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if Auto Power is set to disabled. Deep Sleep Control Fan Control Override Allows you to define the controls when Deep Sleep is enabled. ● Disabled ● Enabled in S5 only ● Enabled in S4 and S5 This option is Enabled in S4 and S5 by default. Allows you to determine the speed of the system fan. When this option is enabled, the system fan runs at the maximum speed. This option is disabled by default. System setup 61