Dell OptiPlex 5050 Tower Tower Owners Manual - Page 36
Heat sink assembly, Removing heat sink assembly
![]() |
View all Dell OptiPlex 5050 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Heat sink assembly Removing heat sink assembly Steps 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. cover b. bezel 3. Open the front panel door. 4. To remove the heat sink assembly: a. Disconnect the heat sink assembly cable from the connector on the system board [1]. b. Loosen the captive screws that secure the heat sink assembly to the system board [2]. c. Lift the heat sink assembly away from the computer [3]. Installing heat sink assembly Steps 1. Align the screws of the heat sink assembly with the holders on the system board. 36 Removing and installing components
![](/manual_guide/products/dell-optiplex-5050-tower-owners-manual-6666f1e/36.png)
Heat sink assembly
Removing heat sink assembly
Steps
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
cover
b.
bezel
3.
Open the
front panel door
.
4.
To remove the heat sink assembly:
a.
Disconnect the heat sink assembly cable from the connector on the system board [1].
b.
Loosen the captive screws that secure the heat sink assembly to the system board [2].
c.
Lift the heat sink assembly away from the computer [3].
Installing heat sink assembly
Steps
1.
Align the screws of the heat sink assembly with the holders on the system board.
36
Removing and installing components