Dell OptiPlex 5060 Small Form Factor Service Manual - Page 48
Processor, Removing processor
![]() |
View all Dell OptiPlex 5060 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3. Install the: a. Hard drive and optical drive module b. HDD assembly c. Front bezel d. Side cover 4. Follow the procedure in After working inside your computer. Processor Removing processor 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel c. HDD assembly d. Hard drive and optical drive module e. Heat sink assembly 3. To remove the processor: a. Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1]. b. Lift the lever upward and lift the processor shield [2]. c. Lift the processor out of the socket [3]. 48 Removing and installing components
![](/manual_guide/products/dell-optiplex-5060-small-form-factor-service-manual-97f8f7e/48.png)
3.
Install the:
a.
Hard drive and optical drive module
b.
HDD assembly
c.
Front bezel
d.
Side cover
4.
Follow the procedure in
After working inside your computer
.
Processor
Removing processor
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side cover
b.
Front bezel
c.
HDD assembly
d.
Hard drive and optical drive module
e.
Heat sink assembly
3.
To remove the processor:
a.
Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b.
Lift the lever upward and lift the processor shield [2].
c.
Lift the processor out of the socket [3].
48
Removing and installing components