Dell OptiPlex 7020 Tower OptiPlex 7020 Mini Tower Owners Manual - Page 21

Installing the Heat Sink Assembly, Removing the Processor, Installing the Processor

Get Dell OptiPlex 7020 Tower PDF manuals and user guides View all Dell OptiPlex 7020 Tower manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Installing the Heat Sink Assembly 1. Place the heat sink assembly into the chassis. 2. Tighten the captive screws in diagonal order to secure the heat sink assembly to the computer. 3. Connect the fan cable to the system board. 4. Install the cover. 5. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. cover b. heat-sink assembly 3. Press the release lever down and then move it outward to release it from the retention hook. Lift the processor cover and remove the processor from the socket. Place it in an antistatic bag. Installing the Processor 1. Insert the processor in the processor socket. Ensure the processor is properly seated. 2. Lower the processor cover. 3. Press the release lever down and then move it inward to secure it with the retention hook. 4. Install: a. heat-sink assembly b. cover 5. Follow the procedures in After Working Inside Your Computer. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Installing the Heat Sink Assembly
1.
Place the heat sink assembly into the chassis.
2.
Tighten the captive screws in diagonal order to secure the heat sink assembly to the computer.
3.
Connect the fan cable to the system board.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
cover
b.
heat-sink assembly
3.
Press the release lever down and then move it outward to release it from the retention hook. Lift the
processor cover and remove the processor from the socket. Place it in an antistatic bag.
Installing the Processor
1.
Insert the processor in the processor socket. Ensure the processor is properly seated.
2.
Lower the processor cover.
3.
Press the release lever down and then move it inward to secure it with the retention hook.
4.
Install:
a.
heat-sink assembly
b.
cover
5.
Follow the procedures in
After Working Inside Your Computer
.
21