Dell OptiPlex 7020 Tower OptiPlex 7020 Mini Tower Owners Manual - Page 47
Gate A20 failure, Invalid Memory
![]() |
View all Dell OptiPlex 7020 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Error Message Description Bad command or Ensure that you have spelled the command correctly, put spaces in the proper file name place, and used the correct pathname. Bad error- The floppy or hard drive controller detected an uncorrectable read error. correction code (ECC) on disk read Controller has failed The hard drive or the associated controller is defective. Data error The floppy or hard drive cannot read the data. For the Windows operating system, run the chkdsk utility to check the file structure of the floppy or hard drive. For any other operating system, run the appropriate corresponding utility. Decreasing One or more memory modules may be faulty or improperly seated. Re-install the available memory memory modules and, if necessary, replace them. Diskette drive 0 seek failure A cable may be loose or the computer configuration information may not match the hardware configuration. Diskette read failure The floppy disk may be defective or a cable may be loose. If the drive access light turns on, try a different disk. Diskette subsystem The floppy drive controller may be faulty. reset failed Gate A20 failure One or more memory modules may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. General failure The operating system is unable to carry out the command. This message is usually followed by specific information-for example, Printer out of paper. Take the appropriate action to resolve the problem. Hard-disk drive The hard drive failed initialization. configuration error Hard-disk drive controller failure The hard drive failed initialization. Hard-disk drive failure The hard drive failed initialization. Hard-disk drive read failure The hard drive failed initialization. Invalid The computer configuration information does not match the hardware configuration configuration. information-please run SETUP program Invalid Memory configuration, please populate DIMM1 DIMM1 slot does not recognize a memory module. The module should be reseated or installed. 47
![](/manual_guide/products/dell-optiplex-7020-tower-optiplex-7020-mini-tower-owners-manual-9bf0278/47.png)