Dell OptiPlex 980 Service Manual - Page 18
Client SubnetMask you must set Client DHCP to Static IP - mebx
View all Dell OptiPlex 980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Some graphics cards require the SERR Message mechanism be disabled. Image Server Lookup Method Specifies how the ImageServer looks up the server address. Static IP DNS NOTE: You must set the Integrated NIC to Enable with ImageServer to set the Lookup Method. ImageServer IP Specifies the primary static IP address of the ImageServer with which the client software communicates. The default IP address is 255.255.255.255 NOTE: You must set the "Integrated NIC" control in the "System Configuration" group to "Enabled with ImageServer" and when "Lookup Method" is set to "Static IP". ImageServer Port Specifies the primary IP port of the image server with which the client software communicates. The default IP port is 06910 Client DHCP NOTE: You must set the "Integrated NIC" control in the "System Configuration" group to "Enabled with ImageServer". Specifies how the client obtains the IP address. Static IP DHCP (default) Client IP NOTE: You must set the "Integrated NIC" control in the "System Configuration" group to "Enabled with ImageServer". Specifies the static IP address of the client. The default IP address is 255.255.255.255 NOTE: To set Client IP you must set Client DHCP to Static IP Client SubnetMask Specifies the subnet mask for the client. The default setting is 255.255.255.255 NOTE: To set Client SubnetMask you must set Client DHCP to Static IP Client Gateway Specifies the gateway IP address for the client. The default setting is 255.255.255.255 License Status NOTE: To set Client SubnetMask you must set Client DHCP to Static IP Displays the current license status. Post Behavior Fast Boot When enabled (default), your computer starts more quickly because it skips certain configurations and tests. NumLock LED Enables or disables the NumLock feature when your computer starts. When enabled (default), this option activates the numeric and mathematical features shown at the top of each key. When disabled, this option activates the cursor-control functions labeled on the bottom of each key POST Hotkeys Allows you to specify the function keys to display on the screen when the computer starts. Enable F2 = Setup (enabled by default) Enable F12 = Boot menu (enabled by default) Keyboard Errors MEBx Hotkey Enables or disables keyboard error reporting when the computer starts. This option is enabled by default. sign-on displays a message stating the keystroke sequence required to enter the Manageability Engine BIOS Extensions(MEBx) Setup program. This option is enabled by default. System Logs BIOS Events Displays the system event log and allows you to: Clear Log Mark all Entries Back to Contents Page