Dell OptiPlex VDI Blaster Edition Devon IT Terminal Operating System (DeTOS) D - Page 17
ELO Touch Screen Support
View all Dell OptiPlex VDI Blaster Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ELO Touch Screen Support Upon connecting an ELO Touch Screen to your thin client you will be presented with a calibration screen on first boot to ensure your unit functions properly. There are two ways to calibrate your ELO Touch Screen device when attached to your thin client. Calibration - Option 1 Upon first boot of the operating system, you will see a gray calibration screen with a countdown timer in the middle if an ELO device is found. 1 Use your finger or a stylus to tap the center of the red cross that displays in the upper left-hand corner. Try to get as close as possible to the small circle in the center of the red cross. Another calibration spot will appear in the top right-hand corner. Use your finger or a stylus to tap the center of the red cross. Repeat for the calibration spots that appear in the bottom right-hand corner of the screen, and then the bottom left-hand corner of the screen. NOTE: If the calibration is inaccurate, the calibration tool will ask you to re-try the process until a more accurate reading is achieved. You can wait until calibration is achieved or press any key to cancel the dialog at any time. Getting Started | 17