Dell P2715Q Dell Users Guide - Page 27
Removing the Cable Cover, Wall Mounting (Optional), P2715Q
View all Dell P2715Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Removing the Cable Cover 1 Press the tab on the cable cover. 2 Remove the two tabs on the bottom part of the cable cover from the slots on the back of the monitor. Wall Mounting (Optional) NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit. Refer to the instructions that come with the VESA-compatible wall mounting kit. 1 Place the monitor on a soft cloth or cushion on a stable, flat table. 2 Remove the stand. 3 Use a Phillips crosshead screwdriver to remove the four screws securing the plastic cover. 4 Attach the mounting bracket from the wall mounting kit to the monitor. 5 Mount the monitor on the wall by following the instructions that comes with the wall mounting kit. NOTE: For use only with UL-listed wall mount bracket with minimum weight/load bearing capacity of 10.66 kg (P2715Q)/8.68 Kg (P2415Q). Setting Up the Monitor | 27