Dell PowerConnect 2708 User's Guide - Page 13
Ethernet Switch Management Features, Port Default Settings, Class Of Service 802.1p Support - images
View all Dell PowerConnect 2708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
A CoS is defined by the user, whereby packets are related to the same Class of Service. After a packet has been classified, it is assigned to one of the queues. The PowerConnect 2708/2716/2724/2748 system can classify according to IPv4 information (DSCP). Class Of Service 802.1p Support The IEEE 802.1p signaling technique is an OSI Layer 2 standard for marking and prioritizing network traffic at the data link/MAC sub-layer. 802.1p traffic is classified and sent to the destination. No bandwidth reservations or limits are established or enforced. The 802.1p is a spinoff of the 802.1Q (VLANs) standard. Ethernet Switch Management Features Web-Based Management With a Web-based management interface, the Ethernet Switches' system can be managed from any Web browser. The system contains an Embedded Web Server (EWS), which serves HTML pages, through which the system can be monitored and configured. TFTP Trivial File Transfer Protocol The PowerConnect 2708/2716/2724/2748 switches support software boot image and software download through TFTP. Remote Monitoring Remote Monitoring (RMON) is an extension to the Simple Network Management Protocol (SNMP), which provides network traffic statistics. RMON defines current and historical MAClayer statistics and control objects, allowing real-time information to be captured across the entire network. The switches support one RMON group for Ethernet statistics. The system provides a means to collect the statistics defined in RMON and to view the results, using the Web management interface in the system. Port Default Settings The PowerConnect 2708/2716/2724/2748 devices's port default settings are as follows: Function Flow Control (user-configurable) Backpressure (user-configurable) Auto Negotiation Speed (user-configurable) Auto Negotiation Duplex (user-configurable) MDIX (not user-configurable) Default Setting Off (disabled on ingress) Off (disabled on ingress) Enabled (1000 Mbps) Enabled (Full Duplex) On (relevant to copper ports only) 13