Dell PowerConnect 3548 User's Guide - Page 44
Connecting a Device to a Power Supply, Installing a Stack, Overview - configure powerconnect 3548p
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Connecting a Device to a Power Supply Connect the supplied AC power cable to the AC power connector on the back panel. NOTE: Do not connect the power cable to a grounded AC outlet at this time. Connect the device to a power source in the steps detailed in "Starting and Configuring the Device" on page 47. Figure 3-4. Back-Panel Power Connector Console Port RPS Connector Power Connector PowerConnect 3524/3548 Rear View Console Port EPS Connector PowerConnect 3524P/3548P Rear View Power Connector After connecting the device to a power source, confirm that the device is connected and operating correctly by examining the LEDs on the front panel. Installing a Stack Overview Each device can operate as a stand-alone device or can be a member in a stack. Up to eight devices or up to 384 ports are supported per stack. All stacks must have a Master unit, and may have a Master Backup unit, with any other devices connected to the stack as Members. 44 Installing the PowerConnect 3524/P and PowerConnect 3548/P