Dell PowerConnect 3548 User's Guide - Page 80
Unit No., Service Tag, Asset Tag 0-16 Characters, Serial No., Asset Apply Changes, Telnet - cli command manual
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
• Unit No. - Indicates the unit number for which the device asset information is displayed. • Service Tag - The service reference number used when servicing the device. • Asset Tag (0-16 Characters) - Indicates the user-defined device reference. • Serial No. - The device serial number. Defining System Information 1 Open the Asset page. 2 Define the relevant fields. 3 Click Apply Changes. The system parameters are defined, and the device is updated. Initiating a Telnet Session 1 Open the Asset page. 2 Click Telnet. A Telnet session is initiated. Configuring device Information Using the CLI Commands The following table summarizes the equivalent CLI commands for viewing and setting fields displayed in the Asset page. Table 6-1. Asset CLI Commands CLI Command hostname name snmp-server contact text snmp-server location text clock set hh:mm:ss day month year show clock [detail] show system id show system asset-tag text show stack show system [unit unit] show system id [unit unit] Description Indicates or modifies the device host name. Sets up a system contact. Enters information on where the device is located. Manually sets the system clock and date. Displays the time and date from the system clock. Displays the service tag information. Displays system information. Sets the device asset tag. Displays the system stack information. Displays system information. Displays system identity information. 80 Configuring System Information