Dell PowerConnect 3548 User's Guide - Page 60
MByte SDRAM. I-Cache 16 KB. D-Cache 16 KB. Cache Enabled., Enter Diagnostic Mode - guide
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Ryan board, based on PPC8247 128 MByte SDRAM. I-Cache 16 KB. D-Cache 16 KB. Cache Enabled. Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom. 2 When the auto-boot message appears, press to get the Startup menu. The Startup menu procedures can be done using the ASCII terminal or Windows HyperTerminal. [1] Download Software [2] Erase Flash File [3] Password Recovery Procedure [4] Enter Diagnostic Mode [5] Set Terminal Baud-Rate [6] Back The following sections describe the available Startup menu options. NOTE: When selecting an option from the Startup menu, take time-out into account: if no selection is made within 35 seconds (default), the device times out. This default value can be changed through CLI. NOTE: Technical support personnel only can operate the Diagnostics Mode (option[4]). For this reason, Enter Diagnostics Mode is not described in this guide. Download Software - option[1] The software download procedure is performed when a new version must be downloaded to replace the corrupted files, update or upgrade the system software. To download software from the Startup menu: 1 From the Startup menu, press [1]. The following prompt appears: Downloading code using XMODEM Running SW Ver. 21_08 Date 21-Aug-xxxx Time 17:22:25 HW version is 00.00.00 Base Mac address is: 00:14:47:78:89:96 Dram size is : 128M bytes Dram first block size is : 102400K bytes Dram first PTR is : 0x1800000 Dram second block size is : 4096K bytes Dram second PTR is : 0x7C00000 60 Configuring PowerConnect 3524/P and 3548/P