Dell PowerConnect 5448 Command Line Interface Guide - Page 104
port security max, interface ethernet, port security mode mac-addresses - save configuration
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Syntax • port security mode {lock | max-addresses} • no port security mode • lock - Saves the current dynamic MAC addresses associated with the port and disables learning, relearning and aging. • max-addresses - Deletes the current dynamic MAC addresses associated with the port and learns up to the maximum number addresses allowed on the port. Relearning and aging are enabled. Default Configuration This setting is disabled. Command Mode Interface Configuration (Ethernet, port-channel) mode. User Guidelines There are no user guidelines for this command. Example In this example, port security mode is set to dynamic for Ethernet interface 1/7. Console(config)# interface ethernet g7 Console(config-if)# port security mode mac-addresses port security max The port security mode Interface Configuration (Ethernet, port-channel) mode command configures the maximum addresses that can be learned on the port while the port is in port security max-addresses mode. Use the no form of this command to restore the default configuration. Syntax • port security max {max-addr} • no port security max • max-addr - Maximum number of addresses that can be learned on the port. Range is 1-128 Default Configuration This default configuration is 1. Command Mode Interface Configuration (Ethernet, port-channel) mode. 104 Address Table Commands