Dell PowerConnect 5448 Command Line Interface Guide - Page 337

• md5-des-keys - Concatenated hexadecimal string of the MD5 key (MSB) and the privacy key (LSB). If authentication is only required you should enter 16 bytes, if authentication and privacy are required you should enter 32 bytes. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or colon. (Range: 16 - 32 characters) • auth-sha-key - The HMAC-SHA-96 authentication level. The user should enter authentication and privacy keys. • sha-des-keys - Concatenated hexadecimal string of the SHA key (MSB) and the privacy key (LSB). If authentication is only required you should enter 20 bytes, if authentication and privacy are required you should enter 36 bytes. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or colon. (Range: 20 - 36 characters) Default Configuration No group entry exists. Command Mode Global Configuration mode. User Guidelines • If auth-md5 or auth-sha is specified, both authentication and privacy are enabled for the user. When you enter a show running-config command, you will not see a line for this user. To see if this user has been added to the configuration, type the show snmp user command. An SNMP EngineID should be defined in order to add users to the device. Changing or removing the value of snmpEngineID deletes the SNMPv3 users database. Example The following example configures a new SNMP Version 3 user. Console (config)# snmp-server user snmp-server v3-host The snmp-server v3-host Global Configuration mode command specifies the recipient of Simple Network Management Protocol Version 3 notifications. Use the no form of this command to remove the specified host. SNMP Commands 337