Dell PowerConnect 5448 Command Line Interface Guide - Page 45

exec-timeout show line terminal history terminal history size Configures the interval that the system waits until user input is detected. Line Configuration Displays line parameters. User EXEC Enables the command history function for the current User EXEC terminal session. Cand history buffer size for the current terminal session. User EXEC LLDP Commands Command Group Description Access Mode lldp enable (global) Enables Link Layer Discovery Protocol. Interface Configuration (Ethernet) lldp enable (interface) Enables Link Layer Discovery Protocol (LLDP) on an interface. Interface Configuration (Ethernet) lldp timer Specifies how often the software sends LLDP updates. Global Configuration lldp hold-multiplier Specifies the amount of time the receiving device should hold a Link Layer Discovery Protocol packet before discarding it. Global Configuration lldp reinit-delay Specifies the minimum time an LLDP port will wait before Global reinitializing LLDP transmission. Configuration lldp tx-delay Specifies the delay between successive LLDP frame transmissions initiated by value/status Global Configuration changes in the LLDP local systems MIB. lldp optional-tlv Specifies which optional TLVs from the basic set should be Interface transmitted. Configuration (Ethernet) lldp managementaddress Specifies the management address to be advertised from an Interface interface. Configuration (Ethernet) lldp med enable Enables LLDP Media Endpoint Discovery (MED) on an interface. Interface Configuration (Ethernet) lldp med network-policy Defines LLDP MED network policy. (global) Global Configuration Command Groups 45