Dell PowerConnect B-RX BigIron RX Series Configuration Guide v02.7.02 - Page 1242

45 Displaying BGP4+ information For example, to display summary information for neighbor 2000:4::110, enter the following command at any level of the CLI. BigIron RX# show ipv6 bgp neighbor 2000:4::110 routes-summary 1 IP Address: 2000:4::110 Routes Accepted/Installed:0, Filtered/Kept:0, Filtered:0 Routes Selected as BEST Routes:0 BEST Routes not Installed in IP Forwarding Table:0 Unreachable Routes (no IGP Route for NEXTHOP):0 History Routes:0 NLRIs Received in Update Message:0, Withdraws:0 (0), Replacements:0 NLRIs Discarded due to Maximum Prefix Limit:0, AS Loop:0 Invalid Nexthop:0, Invalid Nexthop Address:0.0.0.0 Duplicated Originator_ID:0, Cluster_ID:0 Routes Advertised:2, To be Sent:0, To be Withdrawn:0 NLRIs Sent in Update Message:2, Withdraws:0, Replacements:0 Peer Out of Memory Count for: Receiving Update Messages:0, Accepting Routes(NLRI):0 Attributes:0, Outbound Routes(RIB-out):0 Outbound Routes Holder:0 Syntax: show ipv6 bgp neighbor [] routes-summary This display shows the following information: sTABLE 200 BGP4+ neighbor route summary information This field... Displays... IP Address Routes Received Routes Selected as BEST Routes BEST Routes not Installed in IPv6 Forwarding Table Unreachable Routes History Routes The IPv6 address of the neighbor How many routes the switch has received from the neighbor during the current BGP4+ session. • Accepted/Installed - Indicates how many of the received routes the switch accepted and installed in the BGP4+ route table. • Filtered/Kept - Indicates how many routes were filtered out, but were nonetheless retained in memory for use by the soft reconfiguration feature. • Filtered - Indicates how many of the received routes were filtered out. The number of routes that the switch selected as the best routes to their destinations. The number of routes received from the neighbor that are the best BGP4+ routes to their destinations, but were nonetheless not installed in the IPv6 route table because the switch received better routes from other sources (such as OSPFv3, RIPng, IPv6 IS-IS, or static IPv6 routes). The number of routes received from the neighbor that are unreachable because the switch does not have a valid RIPng, OSPFv3, or static IPv6 route to the next hop. The number of routes that are down but are being retained for route flap dampening purposes. 1170 BigIron RX Series Configuration Guide 53-1001810-01