Dell PowerConnect B-RX Multi-Service IronWare Software R02.7.02a Release Notes - Page 15

Code flash and boot flash information This field... Displays... Management Modules Management Module () The management module for which flash information is displayed. The parameter indicates an active or standby management module. The parameter indicates the top or bottom slot (M1 or M2, respectively). Code Flash The model number and size of the management module's code flash. IronWare Image (Primary or Secondary) Indicates the IronWare image installed in the primary or secondary location in the management module's code flash. The actual image name depends on the version of software you have running on your BigIron RX. The output displays the following information about the image:  Version - "2.2.1Txxy" indicates the image version number. The "Txxy" is used by Brocade for record keeping. The "xx" indicates the hardware type, while the "y" indicates the image type.  Size - The size, in bytes, of the image.  Check sum - A unique ID for the image. If the contents of the image change, the check sum changes also.  Compilation date and time - The date and time that Brocade compiled the image. LP Kernel Image (Monitor for LP Image Type 0) Indicates the interface modules Boot-Monitor image stored in the management module's code flash. The management module stores these images only; it does not run the images. The output displays the following information about the image:  Version - "2.2.1Txxy" indicates the image version number. The "Txxy" is used by Brocade for record keeping. The "xx" indicates the hardware type, while the "y" indicates the image type.  Size - The size, in bytes, of the image.  Check sum - A unique ID for the image. If the contents of the image change, the check sum changes also.  Compilation date and time - The date and time that Brocade compiled the image. IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches Release Notes v 1.0 Page 15 of 46