Dell PowerConnect B-RX Multi-Service IronWare Software R02.7.02a Release Notes - Page 6

Category  Management Options Feature description Serial and Telnet access to industry-standard Command Line Interface (CLI) SSHv2 TFTP Web-based GUI SNMP versions 1, 2, and 3 IronView Network Manager  Security  CPU protection:  Logging  sFlow  Uni-directional Link Detection (UDLD) AAA Authentication Local passwords RADIUS Secure Shell (SSH) version 2 Secure Copy (SCP) TACACS/TACACS+ User accounts 802.1x: All EAP types, including MD5, TLS, TTLS, and PEAP Multi-device port authentication Note: Telnet, SSH, Web and SNMP servers are disabled by default, and can be enabled selectively. There are no CLI commands for CPU protection. The BigIron RX forwards unknown unicast, broadcast and multicast packets in hardware; therefore, the CPU is automatically 'protected' from having to handle too many packets. Multiple SysLogD server logging sFLow version 5 Monitors a link between two devices and brings the ports on both ends of the link down if the link goes down at any point between the two devices. Layer 2 features  802.1d Spanning Tree Protocol (STP) and Single Spanning Tree Protocol (SSTP)  802.1p Quality of Service (QoS) queue mapping  802.1q see VLANs, below IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches Release Notes v 1.0 Page 6 of 46