Dell PowerConnect B-RX Multi-Service IronWare Software R02.7.02a Release Notes - Page 40

Defect ID 103402 103451 103539 103645 104043 Technical Severity Summary of Software Fixes in R02.7.02a Medium Medium High High High Summary: The system does not generate a syslog message indicating the speed and duplex setting if the configuration of a fiber SFP is changed to an unsupported setting. Probability: Medium Feature: Optics and SFP Support Function: System Reported in Release: BigIron RX R02.7.01 Summary: A premature flush caused by a group having greater than 122 sources causes PIM to send out a (S, G, RPT) prune separately from (*, G) Join. Probability: Medium Feature: PIM Function: PIM Sparse Reported in Release: BigIron RX R02.7.02 Summary: Adding or modifying a cluster-id under router bgp could cause neighbors to flap Probability: High Feature: IP Protocol Function: BGP Reported in Release: BigIron RX R02.7.02 Summary: SNA-LLC frame out-of-sequence may occur when ip multicast active is enabled Probability: High Feature: Multicast active snooping Function: Multicast active snooping Reported in Release: BigIron RX R02.6.00b Summary: Layer 2 ACL accounting information is not updated on the ports belonging to the same packet processor after an ACL rebind, a system reload, management failover, or a hitless L2 OS Upgrade. This occurs only for terms of an ACL containing the logenable option bound to a port that has enable-deny-logging configured. Probability: Medium Feature: Layer 2 ACL, ACL Accounting Function: Access Lists, System Reported in Release: BigIron RX R02.7.02 IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches Release Notes v 1.0 Page 40 of 46