Dell PowerConnect B-RX Multi-Service IronWare Software R02.8.00 Release Notes - Page 6

Enhancement Descriptions Described in Protocol (MSTP) 802.1s Section: Displaying MSTP information for the specified Ethernet interface Copy software image from a flash card to the flash memory In Release 02.8.00 of the Multi-Service IronWare software, a new copy command have been added to copy the software image from a flash card to the flash memory. Book: BigIron RX Series Configuration Guide Chapter: Using a Redundant Management Module Section: Copying software image from a flash card to the flash memory Continuous System Monitoring (Sysmon) Continuous system monitoring (Sysmon) is implemented in BigIron RX to monitor the overall system operation. It monitors different system components of a router or a switch to determine if those components are operating correctly. Book: BigIron RX Series Configuration Guide Chapter: Continuous System Monitor Enhancement in ACL Support Brocade RX devices now support IPv4 and IPv6 Book: BigIron RX Series Configuration ACLs on the same interface Guide Feature support The following is a list of all the features supported on the BigIron RX switches. See Unsupported features, for features not supported. Supported features The following table lists the features supported on the BigIron RX switches. IronWare Software Release 02.8.00 for Brocade BigIron RX Series Swtches Release Notes v 1.0 Page 6 of 37