Dell PowerConnect B-RX Multi-Service IronWare Software R02.8.00 Release Notes - Page 7

Table 2: Supported features for R02.8.00 Category Feature description System level features • Cisco Discovery Protocol (CDP) • CLI Logging • Denial of Service (DoS) protection • Foundry Discovery Protocol (FDP) • High Availability • Management Options • Security • CPU protection Allows you to configure a Brocade device to intercept and display the contents of CDP packets. This feature is useful for learning device and interface information for Cisco devices in the network. Allows the logging of all valid CLI commands from each user session into the system log. Protection from SYN attacks Protection from Smurf attacks Enables Foundry devices to advertise themselves to other Foundry devices on the network. OS Layer 2 Hitless Software Upgrade Serial and Telnet access to industry-standard Command Line Interface (CLI) Secure Shell (SSH) version 2 (v2) TFTP Web-based GUI SNMP (Version 1,Version 2, and Version 3) IronView Network Manager AAA Authentication Local passwords RADIUS SSHv2 Secure Copy (SCP) TACACS/TACACS+ User accounts 802.1x: All EAP types, including MD5, TLS, TTLS, and PEAP Multi-device port authentication Note: Telnet, SSH, Web and SNMP servers are disabled by default, and can be enabled selectively. There are no CLI commands for CPU protection. The BigIron RX forwards unknown unicast, broadcast, and multicast packets in hardware; therefore, the CPU is automatically protected from having to handle too many packets. IronWare Software Release 02.8.00 for Brocade BigIron RX Series Swtches Release Notes v 1.0 Page 7 of 37