Dell PowerConnect B-TI24x Hardware Installation Guide - Page 13
Network interfaces, Management port, Viewing the media types installed in the ports
View all Dell PowerConnect B-TI24x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Hardware features 1 Management port The Management port provides connectivity to your existing management network through 10/100/1000 copper ports that uses auto-sensing and auto-negotiating to determine the speed (10 Mbps, 100 Mbps, or 1000 Mbps) and mode (full-duplex or half-duplex) of the port at the other end of the link, and adjusts port speed accordingly. The Management port on the PowerConnect B-Series TI24X supports RJ-45 copper connectors, auto MDI or MDIX detection, and has an RJ-45 unshielded twisted pair (UTP) connector. NOTE This port interfaces with the CPU only and not the data plane. Network interfaces Table 1 describes the network interfaces supported on PowerConnect B-Series TI24X devices. For network interface specifications, refer to Table 12 on page 54. TABLE 1 Interface Optics for Network Interfaces Show Media Description 1000Base-BX-D 1000Base-BX-U 1000Base-LHA 1000Base-LX 1000Base-SX 10GBase-LR 10GBase-SR M-GBXD M-GBXU M-LHA M-LX M-SX XG-LR XG-SR Viewing the media types installed in the ports The show media command displays the types of media (copper or fiber) installed in the ports. The following example is show media output. PowerConnect# show media Port 1: Type : 10G XG-SR(SFP+) Vendor: Brocade Version: 1 Part# : PLRXPLSCS4371 Serial#: C833UQ06H Port 2: Type : EMPTY Port 3: Type : EMPTY Port 4: Type : EMPTY Port 5: Type : EMPTY Port 6: Type : 10G XG-SR(SFP+) Vendor: Brocade Version: 1 Part# : PLRXPLSCS4371 Serial#: C847UQ04C Port 7: Type : 10G XG-SR(SFP+) Vendor: Brocade Version: 1 Part# : PLRXPLSCS4371 Serial#: C847UQ04H Port 8: Type : EMPTY Port 9: Type : EMPTY Port 10: Type : EMPTY Port 11: Type : EMPTY Port 12: Type : EMPTY Dell PowerConnect B-Series TI24X Hardware Installation Guide 3 53-1002265-01