Dell PowerConnect B-TI24x Hardware Installation Guide - Page 45
Removing MAC address entries
View all Dell PowerConnect B-TI24x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removing MAC address entries 4 To change the device poll time, enter a command such as the following at the global CONFIG level of the CLI. PowerConnect(config)# chassis poll-time 200 Syntax: chassis poll-time NOTE The can be 0 - 65535 seconds. Removing MAC address entries You can remove learned MAC address entries from the Dell system MAC address table. You can remove the following entries: • All MAC address entries • All MAC address entries for a specified Ethernet port • All MAC address entries for a specified VLAN • A specified MAC address entry in all VLANs For example, to remove entries for the MAC address 000d.cb80.00d in all VLANs, enter the following command at the Privileged EXEC level of the CLI. PowerConnect# clear mac-address 000d.cb80.00d0 Syntax: clear mac-address | ethernet | vlan If you enter the clear mac-address command without any parameters, the software removes all MAC entries. Use the parameter to remove a specified MAC address from all VLANs. Specify the MAC address in the following format: HHHH.HHHH.HHHH. Use the ethernet parameter to remove all MAC addresses for a specified Ethernet port. Use the vlan parameter to remove all MAC addresses for a specified VLAN. Dell PowerConnect B-Series TI24X Hardware Installation Guide 35 53-1002265-01