Dell PowerConnect J-8208 Release Notes JUNOS version 10.3 - Page 46

Quick Start Guides, J-SRX100 Services Gateway Hardware Guide

Page 46 highlights

Junos 10.3 OS Release Notes Quick Start Guides • The following J-SRX Series Quick Start Guides erroneously provide an IP address of 192.168.1/24 in the "Part 4: Ensure That the Management Device Acquires an IP Address" section: • J-SRX100 Services Gateway Quick Start Guide • J-SRX210 Services Gateway Quick Start Guide • J-SRX240 Services Gateway Quick Start Guide The correct IP address in this section is 192.168.1.0/24. J-SRX100 Services Gateway Hardware Guide • The output for the show chassis hardware and show chassis hardware detail commands is incorrectly documented for the Routing Engine field. The following table provides details of the guide, section, incorrect output, and corrected output for these commands. Section Incorrect Value in the Hardware Guide Correct Value Displayed in the Command Output Monitoring the J-SRX100 Services Gateway Chassis Using the CLI RE-J-SRX100-HM RE-J-SRX100H Locating the J-SRX100 Services Gateway Component Serial Number and Agency Labels RE-J-SRX100-HIGHMEM RE-J-SRX100H • The "Understanding Built-In Ethernet Ports" section in the J-SRX100 Services Gateway Hardware Guide erroneously states the following: The services gateway acts as a DHCP client out of the built-in Ethernet ports. If the services gateway does not find a DHCP server within a few seconds, the device acts as a DHCP server and assigns an IP address as 192.168.1.1/24. With the device temporarily acting as a DHCP server, you can manually configure it with the J-Web interface. The correct information for this section is as follows: The services gateway acts as a DHCP client on port fe-0/0/0, and ports fe-0/0/1 to fe-0/0/7 act as a DHCP server. • The "Upgrading the J-SRX100 Services Gateway Low Memory Version to a High Memory Version" section in the J-SRX100 Services Gateway Hardware Guide is missing the following information: The J-SRX100 Services Gateway High Memory model is shipped with the license key. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

Quick Start Guides
The following J-SRX Series Quick Start Guides erroneously provide an IP address of
192.168.1/24 in the “Part 4: Ensure That the Management Device Acquires an IP Address”
section:
J-SRX100 Services Gateway Quick Start Guide
J-SRX210 Services Gateway Quick Start Guide
J-SRX240 Services Gateway Quick Start Guide
The correct IP address in this section is 192.168.1.0/24.
J-SRX100 Services Gateway Hardware Guide
The output for the
show chassis hardware
and
show chassis hardware detail
commands
is incorrectly documented for the Routing Engine field. The following table provides
details of the guide, section, incorrect output, and corrected output for these commands.
Correct Value Displayed
in the Command Output
Incorrect Value in the
Hardware Guide
Section
RE-J-SRX100H
RE-J-SRX100-HM
Monitoring the J-SRX100 Services
Gateway Chassis Using the CLI
RE-J-SRX100H
RE-J-SRX100-HIGHMEM
Locating the J-SRX100 Services
Gateway Component Serial Number
and Agency Labels
The “Understanding Built-In Ethernet Ports” section in the
J-SRX100 Services Gateway
Hardware Guide
erroneously states the following:
The services gateway acts as a DHCP client out of the built-in Ethernet ports. If the
services gateway does not find a DHCP server within a few seconds, the device acts
as a DHCP server and assigns an IP address as 192.168.1.1/24. With the device
temporarily acting as a DHCP server, you can manually configure it with the J-Web
interface.
The correct information for this section is as follows: The services gateway acts as a
DHCP client on port fe-0/0/0, and ports fe-0/0/1 to fe-0/0/7 act as a DHCP server.
The “Upgrading the J-SRX100 Services Gateway Low Memory Version to a High Memory
Version” section in the
J-SRX100 Services Gateway Hardware Guide
is missing the
following information:
The J-SRX100 Services Gateway High Memory model is shipped with the license key.
46
Junos 10.3 OS Release Notes