Dell PowerConnect J-8208 Release Notes JUNOS version 10.3 - Page 47

Errata and Changes in Documentation for Junos OS Release 10.3 for J-SRX Series Services Gateways J-SRX210 Services Gateway Hardware Guide • The output for the show chassis hardware and show chassis hardware detail commands is incorrectly documented for the Routing Engine field. The following table provides details of the guide, section, incorrect output, and corrected output for these commands. Section Incorrect Value in the Hardware Guide Correct Value Displayed in the Command Output Monitoring the J-SRX210 Services RE-J-SRX210-LOWMEM Gateway Chassis Using the CLI RE-J-SRX210B Locating the J-SRX210 Services Gateway Component Serial Number and Agency Labels RE-J-SRX210-LOWMEM RE-J-SRX210B • The "Understanding Built-In Ethernet Ports" section in the J-SRX210 Services Gateway Hardware Guide erroneously states the following: The services gateway acts as a DHCP client out of the built-in Ethernet ports. If the services gateway does not find a DHCP server within a few seconds, the device acts as a DHCP server and assigns an IP address as 192.168.1.1/24. With the device temporarily acting as a DHCP server, you can manually configure it with the J-Web interface. The correct information for this section is as follows: The services gateway acts as a DHCP client on port ge-0/0/0 and ports ge-0/0/1 and fe-0/0/2 to fe-0/0/7 act as a DHCP server. • Installing Software Packages-The current J-SRX210 Services Gateway Hardware Guide does not include the following information: On J-SRX210 devices, the /var hierarchy is hosted in a separate partition (instead of the root partition). If Junos OS installation fails as a result of insufficient space: 1. Use the request system storage cleanup command to delete temporary files. 2. Delete any user-created files both in the root partition and under the /var hierarchy. 47