Dell PowerConnect J-8208 Release Notes JUNOS version 10.3 - Page 59

Outstanding Issues in Junos OS Release 10.3 for J-EX Series Ethernet Switches • In the J-Web interface, in the Port Security Configuration page, you are required to configure action when you configure MAC limit even though configuring an action value is not mandatory in the CLI. [PR/434836] • In the J-Web interface, in the OSPF Global Settings table in the OSPF Configuration page, the Global Information table in the BGP Configuration page, or the Add Interface window in the LACP Configuration page, if you try to change the position of columns using the drag-and-drop method, only the column header moves to the new position instead of the entire column. [PR/465030] • When you have a large number of static routes configured and if you have navigated to pages other than page 1 in the Route Information table in the J-Web interface (Monitor > Routing > Route Information), changing the Route Table to query other routes refreshes the page but does not return to page 1. For example, if you run a query from page 3 and the new query returns very few results, the Results table continues to display page 3 and shows no results. To view the results, navigate to page 1 manually. [PR/476338] • In the J-Web interface, the dashboard does not display the uplink ports or uplink module ports unless transceivers are plugged into the ports. [PR/477549] • The J-Web interface Static Routing page might not display details on entries registered in the routing table. [PR/483885] • An IPv4 static route that has been configured using the CLI might not be displayed when you select Configure > Routing > Static Routing in the J-Web interface. [PR/487597] • In the J-Web interface, the auto-complete feature might not be disabled in the password field. As a workaround, you can disable the auto-complete feature in the browser. [PR/508425] • In the J-Web interface, the Software Upload and Install Package option might not display a warning message when there are pending changes to be committed. [PR/514853] • For a Virtual Chassis configuration member, the J-Web Chassis View displays the assembly model number (for example, F1NYY) instead of the chassis model number (for example, EX4200-24T). As a workaround, use the CLI command show chassis hardware to display correct model numbers. [PR/539977] • When you use an https connection in the Microsoft Internet Explorer browser to save a report from the View Events page (Monitor > Events and Alarms > View events) in the J-Web interface, the following error message is displayed: Internet Explorer was not able to open the Internet site [PR/542887] • In the J-Web interface, when you use an https connection in the Microsoft Internet Explorer browser, you cannot upload (Maintain > Config Management > Upload) or download (Maintain > Config Management > History > Configuration History) a configuration file. As a workaround, use an http connection. [PR/551200] 59