Dell PowerConnect J-EX4200 Hardware Guide - Page 106
Mounting a J-EX4200 Switch, Table 30: Inventory of Components Provided with a J-EX4200 Switch
View all Dell PowerConnect J-EX4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide Table 30: Inventory of Components Provided with a J-EX4200 Switch (continued) Component Quantity Cage nuts for a round-hole rack (clip nuts), #10-32, 0.375-in. (9.525-mm), for mounting the switch in a rack 4 or cabinet Cage nuts for a square-hole rack, #10-32, 0.375-in. (9.525-mm), for mounting the switch in a rack or cabinet 4 Phillips pan-head screws, #10-32 x 5/8-in (15.8-mm), for mounting the switch in a rack or cabinet 4 Phillips pan-head screws, #12-24 x 1/2-in. (12.7-mm), for mounting the switch in a rack or cabinet 4 Washers, #10, for mounting the switch in a rack or cabinet 4 RJ-45 cable and RJ-45 to DB-9 serial port adapter 1 Virtual Chassis cable 1 Virtual Chassis cable connector retainers 2 Dust covers for ports (for a J-EX4200-24F switch) 24 Quick Start installation instructions 1 Dell PowerConnect Safety, Environmental, and Regulatory Information 1 End User License Agreement 1 DellPowerConnect Warranty and Support Information 1 Registration and Software Updates for Your Dell PowerConnect J-Series Product 1 Open Source Code Notice 1 Related • Mounting a J-EX4200 Switch on page 90 Documentation • Installing and Connecting a J-EX4200 Switch on page 87 • Connecting and Configuring a J-EX Series Switch (CLI Procedure) on page 131 • Connecting and Configuring a J-EX Series Switch (J-Web Procedure) on page 133 Mounting a J-EX4200 Switch You can mount a J-EX4200 switch: • On two posts in a 19-in. rack or cabinet by using the mounting brackets provided with the switch. • On four posts in a 19-in. rack or cabinet by using the separately orderable four-post rack-mount kit. 90