Dell PowerConnect J-EX4200 Hardware Guide - Page 76
Environmental Requirements and Specifications for J-EX Series Switches
View all Dell PowerConnect J-EX4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide Table 24: Site Electrical Wiring Guidelines (continued) Site Wiring Factor Guidelines Radio frequency interference Electromagnetic compatibility To reduce or eliminate radio frequency interference (RFI) from your site wiring, do the following: • Use twisted-pair cable with a good distribution of grounding conductors. • If you must exceed the recommended distances, use a high-quality twisted-pair cable with one ground conductor for each data signal when applicable. If your site is susceptible to problems with electromagnetic compatibility (EMC), particularly from lightning or radio transmitters, seek expert advice. Some of the problems caused by strong sources of electromagnetic interference (EMI) are: • Destruction of the signal drivers and receivers in the switch • Electrical hazards as a result of power surges conducted over the lines into the equipment Related • General Safety Guidelines and Warnings for J-EX Series Switches on page 171 Documentation • General Electrical Safety Guidelines and Warnings for J-EX Series Switches on page 197 • Prevention of Electrostatic Discharge Damage on J-EX Series Switches on page 198 • Power Supply in J-EX4200 Switches on page 21 Environmental Requirements and Specifications for J-EX Series Switches The switch must be installed in a rack or cabinet housed in a dry, clean, well-ventilated, and temperature-controlled environment. Ensure that these environmental guidelines are followed: • The site must be as dust-free as possible, because dust can clog air intake vents and filters, reducing the efficiency of the switch cooling system. • Maintain ambient airflow for normal switch operation. If the airflow is blocked or restricted, or if the intake air is too warm, the switch might overheat, leading to the switch temperature monitor shutting down the switch to protect the hardware components. Table 25 on page 60 provides the required environmental conditions for normal switch operation. Table 25: J-EX Series Switch Environmental Tolerances Description Tolerance Altitude No performance degradation to 10,000 feet (3048 meters) 60