Dell PowerConnect M6348 User's Guide - Page 240

Configuring Auto Configuring Using the CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Utility Commands Defining Stacking Use the Stacking menus to set the stacking characteristics of the device. The changes to these attributes are applied only after the device is reset. System > Stacking in the tree view to display the Stacking page. Use this page to go to the following features: • Stacking Standby • Unit Configuration • Stack Summary • Supported Switches • Stack Port Summary • Stack Port Counters • Stack Port Diagnostics NOTE: The PowerConnect M8024 does not support stacking. Stacking Standby You can now select a unit in the stack to be the Standby switch. The unit configured as the Standby switch becomes the stack manager if the current manager fails. To remove the selected unit as the Standby switch, click Delete. Unit Configuration Use the Unit Configuration page to define general device parameters. To display the Unit Configuration page, click System > Stacking > Unit Configuration in the tree view. 238 Configuring System Information