Dell PowerConnect M6348 User's Guide - Page 364
Multicast Router Timeout, Leave Timeout, Immediate Leave, General, Interface, Apply Changes
View all Dell PowerConnect M6348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
• Multicast Router Timeout - Specifies time before aging out a Multicast router entry. The default value is 300 seconds. • Leave Timeout - Specifies time, in seconds, after a port leave message is received before the entry is aged out. Enter an amount of time for the timeout period, or click Immediate Leave to specify an immediate timeout. The default timeout is 10 seconds. Enabling IGMP Snooping on an Interface 1. Open the General IGMP snooping page. 2. Select the unit and port, LAG, or VLAN to configure from the Interface field. 3. Complete the fields on the page as needed. 4. Click Apply Changes. IGMP snooping is enabled on the selected interface. Displaying the IGMP Snooping Table 1. Open the IGMP Snooping page. 2. Click Show All. The IGMP Snooping Table displays. Figure 7-78. IGMP Snooping Table 3. Use the Unit drop-down menu to view the IGMP Snooping Table for other units in the stack, if they exist. 362 Configuring Switching Information