Dell PowerConnect M6348 User's Guide - Page 412
DHCP Relay Trust Mode, DHCP Relay Interface Configuration
View all Dell PowerConnect M6348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
DHCP Relay Interface Configuration Use this page to enable L2 DHCP relay on individual ports. NOTE: L2 DHCP relay must also be enabled globally on the switch. To access this page, click Switching > DHCP Relay > Interface Configuration in the tree view. Figure 7-124. DHCP Relay Interface Configuration The DHCP Relay Interface Configuration page contains the following fields: • Interface - Select the slot/port to configure this feature on. • DHCP Relay Mode - Enable or disable L2 Relay mode on the selected interface. • DHCP Relay Trust Mode - Enable or disable L2 Relay Trust Mode on the selected interface. Trusted interfaces usually connect to other agents or servers participating in the DHCP interaction (e.g. other L2 or L3 Relay Agents or Servers). When enabled in Trust Mode, the interface always expects to receive DHCP packets that include Option 82 information. If Option 82 information is not included, then these packets are discarded. Untrusted interfaces are generally connected to clients. DHCP packets arriving on an untrusted interface are never expected to carry Option 82 and are discarded if they do. Displaying the DHCP Relay Interface Summary Table 1. Open the DHCP Relay Interface Configuration page. 2. Click Show All. The DHCP Relay Interface Summary table displays. 410 Configuring Switching Information