Dell PowerConnect M6348 User's Guide - Page 86
Configuring an Initial Telnet Password, ip http authentication
View all Dell PowerConnect M6348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Configuring an Initial Telnet Password To configure an initial Telnet password, enter the following commands: console(config)#aaa authentication login default line console(config)#aaa authentication enable default line console(config)#line telnet console(config-line)#login authentication default console(config-line)#enable authentication default console(config-line)#password pass1234 • When initially logging onto a switch through a Telnet session, enter pass1234 at the password prompt. • When changing a switch mode to enable, enter pass1234. Configuring an Initial HTTP Password To configure an initial HTTP password, enter the following commands: console(config)#ip http authentication local console(config)#username admin password user1234 level 15 Configuring an Initial HTTPS Password To configure an initial HTTPS password, enter the following commands: console(config)#ip https authentication local Note: You should generate a new crypto certificate each time you upgrade (install a new version of) the control software application on the switch. Enter the following commands once when configuring to use an HTTPS session over a console, a Telnet, or an SSH session. Note: In the Web browser enable SSL 2.0 or greater for the page content to appear. console(config)#crypto certificate 1 generate console(config)#ip https server Note: Http and Https services require level 15 access and connect directly to the configuration level access. 84 Configuring Dell PowerConnect