Dell PowerConnect W-AP134 Installation Guide - Page 4
Before You Begin
View all Dell PowerConnect W-AP134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Before You Begin CAUTION: FCC Statement: Improper termination of access points installed in the United States configured to non-US model controllers will be in violation of the FCC grant of equipment authorization. Any such willful or intentional violation may result in a requirement by the FCC for immediate termination of operation and may be subject to forfeiture (47 CFR 1.80). CAUTION: EU Statement: Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the Dell PowerConnect W-Series ArubaOS 6.1 User Guide for details on restrictions. Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous referrer au Dell PowerConnect W-Series ArubaOS 6.1 User Guide pour les details des restrictions. Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlüglich Einschränkungen finden Sie im Dell PowerConnect W-Series ArubaOS 6.1 User Guide. Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla Dell PowerConnect W-Series ArubaOS 6.1 User Guide per avere informazioni detagliate sulle restrizioni. Pre-Installation Network Requirements After WLAN planning is complete and the appropriate products and their placement have been determined, the Dell Controller(s) must be installed and initial setup performed before the Dell Access Points are deployed. For initial setup of the Controller, refer to the Dell PowerConnect W-Series ArubaOS 6.1 Quick Start Guide for the software version installed on your controller. Pre-Installation Checklist Before installing your W-AP130 Series access point, be sure that you have the following: For the W-AP134: External antennas as specified in the network deployment plan CAT5 or better UTP cable of required length One of the following power sources: IEEE 802.3at-compliant Power over Ethernet (PoE) source The POE source can be any power source equipment (PSE) controller or midspan PSE device Dell 12 VDC AP AC-DC adapter kit (sold separately) Dell Controller provisioned on the network: Layer 2/3 network connectivity to your access point One of the following network services: Aruba Discovery Protocol (ADP) DNS server with an "A" record DHCP Server with vendor-specific options 4 Dell PowerConnect W-AP130 Series Access Point | Installation Guide