Dell PowerEdge 2450 SCSI Backplane Daughter Card (.pdf) - Page 3
Dell™ PowerEdge™ 2450 Systems, Installing a Fifth SCSI Hard-Disk Drive - drive bay
View all Dell PowerEdge 2450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Dell™ PowerEdge™ 2450 Systems Installing a Fifth SCSI Hard-Disk Drive This document describes installing and configuring an optional fifth small computer system interface (SCSI) hard-disk drive in your computer's peripheral bay. Before You Begin Before installing a fifth SCSI hard-disk drive, you should install and configure the other four SCSI drives. If you want to set up the five drives in a split 1 x 2 and 1 x 3 configuration, a second, optional SCSI backplane daughter card must be installed in your system. (For more information on the daughter card, see "Installing Hard-Disk Drives" in your system's Installation and Troubleshooting Guide.) Figure 1-1 illustrates the system components associated with the SCSI hard-disk drives. . SCSI backplane board data cable SCSI backplane board Ultra3 (Ultra160) SCSI interface connector (SCSI1) SCSI hard-disk drives (4) SCSI ID 0 SCSI ID 1 SCSI ID 2 SCSI ID 3 spare power cable SCSI interface cable connection for fifth hard-disk drive interposer card peripheral bay Figure 1-1. Basic SCSI Hard-Disk Drive System Components support.dell.com Dell PowerEdge 2450 Systems - Installing a Fifth SCSI Hard-Disk Drive 1-1