Dell PowerEdge 6450 Rack Installation Guide - Page 17

NOTES: If you purchased a Dell rack along with your PowerEdge system, the slide assemblies may be preinstalled in the rack. For instructions on installing the PowerEdge system itself, see "Installing the System in the Rack" found later in this guide. The subsections that follow include instructions for performing the following tasks: Removing the doors from the rack Installing the slide assemblies in the rack Installing the system in the rack Installing the cable tray Installing the cable-management arm Reversing the cable-management arm installation Replacing the rack's front and back doors You must remove the doors from the rack to provide access to the interior of the rack and to prevent damage to the doors while installing the computer system. 1. Open the latch on the front door (see Figure 1-2). Slide the button cover up as far as it will go, press the push button, rotate the handle clockwise until the latch releases, and then pull the door open. support.dell.com Dell PowerEdge 6x50 Systems Rack Installation Guide 1-3