Dell PowerEdge 6450 Rack Installation Guide - Page 30

pull pin offset hinge latch pin rail-mounting plate The following subsections describe procedures for replacing the rack doors on the 42-U rack and the 24-U rack. 1. Lift the front door into position and align the hinges with the holes in the rack as shown in Figure 1-3. 2. Slide the hinges into the holes in the rack until the hinge release levers lock the hinges into position. 3. Close the door latch by rotating the handle counterclockwise until it stops, push in the handle until it locks in position, and then slide the button cover down over the push button (see Figure 1-2). 4. Repeat steps 1 through 3 to install the back door, but turn the handle clockwise. 1-16 Dell PowerEdge 6x50 Systems Rack Installation Guide