Dell PowerEdge 7250 Product Guide (.htm) - Page 18
Configuring Your Managed System with the System Maintenance Utility (SMU), Utilities - memory
View all Dell PowerEdge 7250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
www.dell.com | support.dell.com Configuring Your Managed System with the System Maintenance Utility (SMU) NOTE: The SMU can be run from both the Resource CD and from the system's utility partition (UT). See the System Software Guide on the Resource CD for instructions on running the SMU from the UT. The managed system must have a CD drive. A network connection is not required. The following sequence of steps is followed to start the SMU locally (using the system Resource CD): 1 Insert the system Resource CD into the CD drive on the managed system and boot the system to the EFI shell. The Resource CD menu program begins running automatically and displays a splash screen followed by the main menu. 2 Use the arrow keys to move to the Utilities menu item. Press the key. 3 Use the down arrow key to highlight the System Maintenance Utility menu item. Press the key to start the local SMU application. The server management configuration task appears in the task pane of the SMU. This task allows you to configure server management settings maintained by the BMC. The server management configuration task supports configuring of the following, which are displayed as sub-tasks: • Users • LAN Channel • Serial/Modem • Platform Event Filtering (PEF) • Power Settings Upon selecting one of the above sub-tasks, a screen is displayed that contains some or all of the configuration items that pertain to the selected sub-task. The data that is initially displayed is read from the server management controller of the system. You can update the settings and save them back to the system. Sub-tasks can be made up of one or more screens, depending on the server management configuration settings you enabled. Buttons that are common to the server management configuration tasks are: Save - Causes the current values of the settings in the current subtask to be stored in non-volatile memory on the system. Edit - Causes a screen to be displayed that allows you to change settings related to a single entry in a table. 16 Configuring Your Managed System